Oprava USB kľúča: Oprava nefunkčného USB disku a obnovenie súborov

It’s quite common to see your USB drive cannot be shown and opened with the appearance of all kinds of errors on your desktop such as “USB flash drive not recognized”, “Please insert a disk into removable disk”, “You need to format the disk before you can use It” and “RAW USB drive”, etc. What are these errors and what’s going wrong with your USB drive? How can we recover data from inaccessible or formatted USB drives? Let’s find out.

Prečo USB kľúč nefunguje alebo nie je rozpoznaný?

Flash drive issues can be boiled down to two categories of errors, logical and physical. Logical errors can be corrected with some DIY tricks while physical ones cannot be solved without professional knowledge. The main solution to physical errors is to seek the help of professionals.

Logical errors

• Data corruption after the drive is unmounted improperly from the port: You may unplug your flash drive without clicking “eject” last time, which leads to data corruption in your drive. Therefore when connected again to your PC, the flash drive cannot be recognized by the operating system.
• Invalid data in the Master Boot Record (MBR), Záznam zavádzania oddielu (PBR) alebo štruktúra adresárov na USB disku : Data stored in MBR, PBR, or about directory structure may go wrong, which can cause the drive unable to work since they carry the information about how and where the operating system find and read data stored in each sector.

Fyzické chyby

• Broken stems and connectors
• Nefunkčné disky (bez napájania)
• Broken circuit or NAND gate
• Corrupted flash drive controller software caused by low-grade or generic NAND memory

Všetky štyri vyššie uvedené chyby súvisia s poškodenie hardvéru a fyzické odpojenie na flash disku. Oprava disku s týmito chybami môže vyžadovať presné spájkovanie a tavidlo s lupou. Bez odborných znalostí a špecializovaného vybavenia nie je možné opraviť flash disky s poškodeným hardvérom svojpomocne. Najlepšie je, ak... seek help from professionals if the data in the drive is much more important.

How to Recover Files from Corrupted or Formatted USB Flash Drive

Usually, data stored in a flash drive is even more valuable than the drive. We need to first recover the data uložené na USB kľúči a zálohujte ich Po overení bezpečnosti údajov prejdeme k oprave USB disku. Teraz sa pozrime, ako obnoviť údaje z USB kľúča pomocou programu Data Recovery.

Data Recovery is an easy-to-use and user-friendly app that can recover photos, videos, documents, etc. from a USB flash drive, or hard drive on the computer. More importantly, it can be set to quick scan or deep scan your drive. The former can quickly scan out data that are deleted recently while the latter will take a longer time to search out data that are deleted a long time ago. And there will be no data loss once it is successfully retrieved.

Krok 1: Download Data Recovery and install it on your PC.

Bezplatné stiahnutie Bezplatné stiahnutie

Krok 2: Otvorte ho kliknutím na ikonu Obnova dát.

Krok 3: After opening, you can narrow down the recovering scope to reduce scanning time by ticking off the type of files chcete obnoviť, alebo môžete pre istotu zaškrtnúť všetky súbory.

Krok 4: Select the flash drive chcete skenovať, v zozname Vymeniteľné zariadenia. Uistite sa, že je USB kľúč zapojený do počítača.

Krok 5: Click “Scan” v pravom dolnom rohu.

Krok 6: After scanning, all deleted files from your flash drive will be presented according to their file type or their path. You can choose the way of viewing them by selecting “Type List” or “Path List”.

Step 7: Zaškrtnite súbory, ktoré chcete obnoviť. Kliknite na tlačidlo „Obnoviť“ v pravom dolnom rohu a vyber si cestu you want to store in. You may want to recover the data to the hard drive of your computer if the USB flash drive is corrupted and need to be formatted.

Bezplatné stiahnutie Bezplatné stiahnutie

After recovering and backing up your files, you can then go to fix your USB drive without scruple.

5 Ways to Repair Corrupted Flash Drive

The following five solutions are summed up by the author according to their degree of intricacy. You should try them out in order.

1. Try another USB port or try another PC

Ak počítač nedokáže rozpoznať váš USB kľúč, problém nemusí byť nevyhnutne spôsobený samotným USB kľúčom. USB port počítača môže byť chybný. Môžete odpojiť disk a vložiť ho do iného. USB port if there is more or into the port of another PC.

2. Spustite nástroj na opravu vymeniteľného disku systému Windows

• Open “This PC” and find your USB drive .
• Right-click your drive and open “ Properties „.
• Kliknite na “Tools” tab on the top.
• Click the “ Check Now ” button (or the “ Rebuild „tlačidlo“, ak máte systém Windows 10).
• Select both options: “Automatically fix file system errors” and “Scan for and attempt recovery of bad sectors”.
• Kliknite na tlačidlo „Štart“ and wait until the scan process is finished.

3. Povoľte zariadenie USB v ovládacom paneli

Tento spôsob je obzvlášť účinný, keď vás systém upozorní na nedetekovateľný disk.

• Right-click Start and click “Device Manager” (Or go to Start> Control Panel> Device Manager or Right-click My Computer/ This PC >>Click Manage>>Click Device Manager on the left side.)
• Expand the list: Diskové jednotky .
• Right-click your drive a enable it.

After enabling, you also need to assign this drive letter:

• Right-click My Computer/This PC >>Click Manage >>Click Storage>Disk Management.
• Kliknite pravým tlačidlom myši na USB kľúč a vyberte možnosť „ Change Drive Letter and Paths „...“

In the pop-up window, click “change”. Assign any available drive letter to the USB drive by clicking it.

4. Preinštalujte ovládače

It is possible that the drivers that run your flash drive are corrupted before the system recognizes the drive. Therefore you should try reinstalling the drivers.

1. Right-click My Computer/This PC and otvoriť Spravovať .
2. Click Device Manager na ľavej strane.
3. Rozbaľte možnosť „ Diskové jednotky „.
4. Right-click the name of your drive, kliknite na „odinštalovať“ and click “OK”

Eject your flash drive safely and restart your PC. Then see whether your flash drive can be detected and recognized.

5. Format corrupted Pen Drive or SD card using CMD

Using Command Prompt (CMD) can forcefully format your pen drive and may solve the problem. Let’s see how to do it.

1. Hover your cursor over the Start Menu; kliknite naň pravým tlačidlom myši a vyberte príkaz Príkazový riadok (Admin)
2. Type in: diskpart and press Enter.
3. Type in: list disk and press Enter.
4. Type in: select disk x [x is the number of your flash drive]. You can judge the number by the size of your flash drive.
5. Type in: clean and press Enter.
6. Type in: create partition primary and hit Enter.
7. Type in: active and press Enter.
8. Type in: vyberte oddiel 1 and press Enter.

There will be a response: Partition 1 is now the selected partition; Type in: format fs=fat32 and press enter (If you need to store a file whose size is more than 4 GB, you should write NTFS). Wait until the process is finished.

You can try the above solutions one by one to exclude the possible problem or solve it. If the USB drive is still unreadable after trying every solution, maybe it’s very likely that your pen drive has been physically damaged. You can either seek help from professionals if the data in it is not backed up and cannot be recovered. Otherwise, it’s high time to buy a new one!

After introducing and explaining so much knowledge related to a USB drive, so much for today, and thank you for reading!

Bezplatné stiahnutie Bezplatné stiahnutie